Hex Nut Manufacturers Introduces The Use Of T-Bolts

By yongding at 2021-01-20 • 0 collector • 61 pageviews

Hex Nut Manufacturers introduces T-bolts classified by purpose:

1. T-bolt, the most commonly used is 45# steel, which has been forged, quenched and tempered. There are also low-carbon steel, more useful alloy steel, 304 and 316 stainless steel; choose the material and mechanical performance level according to actual needs. Surface treatments include chemical blackening, electro-galvanizing, hot-dip galvanizing, dacromet, mechanical galvanizing and dacromet electroplating.

2. The T-bolt (also called hammer head bolt) of the aluminum alloy profile is made of SUS304 stainless steel and medium carbon steel. The surface of medium carbon steel T-shaped screws can be galvanized or nickel-plated or dacromet. The material of carbon steel T-bolt is 1045 medium carbon steel, which is produced by red satin process, and the grade after heat treatment is 8.8. Usually, template bolts and T-shaped screws can be directly inserted into the groove, and can be automatically positioned and assembled during installation. locking. T-bolts are usually used together with flange nuts. They are standard connection fasteners when installing corners. Choose T-bolts according to the groove width of the profile.

3. The T-bolt of the water supply system and the T-bolt of the 1.4T channel generally refer to the T-bolt of the national standard GB37-881.5 building fasteners. These fasteners are mainly locked and fixed by construction scaffolding, mainly low carbon Steel is produced. Flange nuts are usually used. The most commonly used are M12, M14, American standard UNC1/2-13 and British standard BSW1/2-12 teeth.

Through the above introduction, 2h Hex Nut Supplier hopes that you can simply refer to the content of this article in future use.

Requires Login