Title
Will you use the laminator correctly?
Favorites
Description

How much do you know about the laminating machine? Will it be used correctly? What should I pay attention to during use?

1. Horizontal wrinkles. This is due to the fact that the longitudinal tension of the mulch is less than the transverse tension, and the uneven forward speed. Solution: reduce the pressure of the left and right film pressing wheels; increase the clamping force of the film roll; the forward speed of the unit should be uniform.

2. Longitudinal wrinkles. This is due to reasons such as that the longitudinal tension of the mulch is greater than the transverse tension. Solution: increase the pressure of the left and right film pressing wheels; reduce the clamping force of the film roll; appropriately reduce the forward speed of the unit.

3. Oblique wrinkles. The reason is that the unit fails to travel in a straight line during traction, or the pressure of the left and right pressure film wheels is inconsistent. Solution: Improve the level of operation technology to make the unit move straight; adjust the two pressure film wheels to make the pressure uniform.

4. Deflection of the mulching film. It is caused by the failure of the unit to travel in a straight line, or the improper installation of the film roll, and the uneven winding of the film roll itself. Solution: realign the film roll to the border surface and be perpendicular to the forward direction of the unit; the unit must travel in a straight line at a constant speed; check the film roll and replace it if necessary.

5. The film pressing wheel cannot hold down the mulching film. This is caused by the improper driving of the unit, the mismatch between the width of the mulching film and the border surface, and the poor winding quality of the mulching film itself. It should be resolved according to the specific situation.

6. After filming, the edges are crimped and both sides are broken. For curling, increase the pressure of the film pressing wheel, reduce the deflection angle of the earth-covering shovel, and adjust the distance between the earth-covering shovel and the mulching film. In the event of membrane rupture, the pressure of the two pressure membrane wheels should be reduced, and the quality of ground preparation should be checked.

If you are interested in our products, you can click here: automatic laminating machine factory.


Site Icon
Will you use the laminator correctly?
Categories
Rate the Link
Page Views
27
Link Clicks
0
Visit with QR Code
Share
Add to your Site
<iframe src="https://bookmess.com/widget/63984" frameborder="0" scrolling="no" width="125" height="125"></iframe>
User ReviewsSubmit Your Review
Based on 0 Votes and 0 Reviews
5 Star
0
4 Star
0
3 Star
0
2 Star
0
1 Star
0
Submit Your Review
We'll never share your email with anyone else.