China Emergency Light Manufacturers introduces how to use car emergency lights:
1. Driving in a foggy day. Due to poor visibility in foggy days,
not only the double flashing lights should be turned on, but also the fog lights
should be turned on to remind the passing vehicles to pay attention and to
illuminate themselves.
2. When a breakdown occurs on the road or a traffic
accident occurs, the double flashing lights should be turned on to remind
passing vehicles to pay attention to safety. After a vehicle breaks down or
stops in an accident on the expressway, if the lights and warning signs are not
used in accordance with the regulations, 12 points will be scored at a
time.
3. When towing a faulty motor vehicle, both the towing vehicle and the
towed vehicle should turn on the hazard warning flashing lights to remind
themselves that the vehicle is in an abnormal state.
4. When temporarily
stopping on the road, turn on the double flashing lights to remind other cars to
pay attention.
5. When forming a convoy permitted by the transaction police
department, the vehicles in the convoy should turn on double flashing
lights.
6. When the visibility is less than 100 meters, turn on the fog
lights, low beam lights, position lights, front and rear position lights and
hazard warning flashers, the speed shall not exceed 40 kilometers per hour, and
the distance between the vehicle ahead and the vehicle in the same lane shall be
more than 50 meters;
7. When the visibility is less than 50 meters, turn on
the fog lights, low beam lights, position lights, front and rear position lights
and hazard warning flashers, the speed shall not exceed 20 kilometers per hour,
and leave the highway as soon as possible from the nearest exit.
Through the above introduction,China Jump Start Manufacturers hopes that you can simply refer to the content of this article in future use.
