Radio Tubular
Motor Manufacturers introduces the installation skills of the wiring
position of the electric screen:
1. From the perspective of home use: tend to be installed below. It can be connected with other electrical appliances or plug-in boards when needed. It is not recommended to install on the top. This is neither beautiful, but also saves the budget for hydropower transformation. Objectively speaking, compared with the decoration value of your entire room, the telescreen is only a small part. The east-west door of this value does not need to be installed at a height. In the future, if the room cover is higher than the board, the possibility of use is too small
2. Install the socket in an inconspicuous place: Depending on the position of the socket, there may be other electrical appliances nearby to supply power to the screen. At least 5 holes. In a few years, you won't like telescreens anymore. If you want to replace it, this circuit can be used for other purposes. Sometimes it can also be used as a power source for air conditioners. Of course, in this case, we need to lay a larger diameter wire.
3. Choice of socket location: curtains hung on the wall, adjacent corners. If the telescreen blocks the teahouse, it will be very uncomfortable.
Wiring skills of different types of telescreens:
Through the above introduction, Smart Curtain Motor Manufacturers hopes that you can simply refer to the content of this article in future use.
